Tip o’ the Week 445 – Finding Modern App names

Posted on August 24, 2018 (Updated November 5, 2021) by ewand

As detailed in ToW #443, there are ways of running Modern Windows apps from a script, command line or maybe just from the WindowsKey+R Run prompt – so you don’t need to use the mouse or your finger to activate them.

If you’re looking for the shortcut name for your favourite app, there’s a somewhat lengthy process to find out what it is, but at least you only need to do it once…

Try the following:

Fire up PowerShell (press Start, type powershell then make sure you don’t go for the ISE unless you want to do some script authoring and debugging. In other words, if you don’t know why you would want to run PowerShell ISE, then just stick with PowerShell…)
From the PowerShell console, run get-appxpackage > $env:userprofile\apps.txt – this will grab the details of every installed modern app in turn, and pipe all of the text to a file
Press WindowsKey+R and run apps.txt to launch the file, and you’ll see an almost impenetrable wall of text (thousands of lines – in Notepad, go to the View menu and enable the Status Bar then press CTRL+END to jump to the very bottom, if you want to see just how many lines…)

Now, you might be able to figure out from the Name line in the text, which app the following details pertain to, but it’s not always obvious – take the Mail app, for example … if you have it pinned to the Start menu and then drag/drop it onto your desktop to create a shortcut, you can see the target (which is the same as the PackageFamilyName attribute in the text file) is a bit more opaque…
There are all sorts of ways you could dig around in the file system and/or the registry to find out what the shortcut name is to launch your chosen app, but perhaps the quickest is to copy/paste this text into a PowerShell console and hit enter:

foreach ($p in $(get-appxpackage)) { foreach ($n in (Get-AppxPackageManifest $p).package.applications.application.extensions.extension.protocol.name) { $p.packagefullname + “`t `t `t -=- ” + $n } }
This will display a list of all the packages and the “protocols” that each can support, in other words the direct commands you can run to invoke them (if you run that command and stick a “:” on the end). Some will be pretty useless, but others can be handy – like onenote-cmd: which launches the Modern OneNote without the annoying prompt you get if you just try onenote:
If you want to create a traditional (eg Desktop) shortcut to one of your fave apps, just right-click, New, Shortcut and enter the command, give it a name, and Robert’s your father’s brother.

You could use a variant of this approach to automatically launch Modern apps when Windows itself starts – from WindowsKey+R, enter shell:startup and drop (or create) your shortcut in there.

Tip o’ the Week 444 – Computer! Computer!? Hello Computer?!?

Posted on August 24, 2018 by ewand

Remember the time when talking to a computer seemed like science fiction?

If you’re an Amazon Echo or Sonos One* user, you’ll already be familiar with barking orders at an inanimate object. If you’re tired of shouting ALEXA… ALEXA!!!, then you can even change the “Wake Word” on the Amazon devices – but not yet others – so you can say other things instead. Handy if your daughter or your dog is called Alexa.

In the Alexa app on your phone, go to Settings, look under the list of devices and if you select an Echo device of some sort, then you’ll find a Wake Word option fairly far down the list. This lets you choose something else, though not yet at the level when you could make up your own wake word…

Anyway, who can pass up the opportunity to pretend to be Mr Scott?
(Isn’t it amazing what you could do with one-fingered, random typing on a keyboard in 1986…?)

Anyway, recent announcements saw the preview of Cortana joining hands with Alexa and allowing access both from Windows 10 PCs to (some) Alexa functionality, and US-based Amazon users can access Cortana stuff through Alexa-enabled devices.

On your PC, you may need to check your Cortana settings (just press WindowsKey and start typing Cortana to see the settings) to either enable the Hey Cortana key phrase, or press WindowsKey+C as a shortcut, then speak.

Voice-searching on the PC using Cortana can be a pretty handy thing to do, as there are plenty of phrases that will give you a direct response rather than take you to a website. It’s quicker to press the WindowsKey+C option than to say “Hey Cortana”, and you could ask stuff like M-S-F-T, what’s the time in New York, what’s the news, what’s the weather, convert pound to dollar and so on.

To start using Alexa on your PC, just go to Cortana and say “Open Alexa” – at which point, on the first run, you’ll be prompted to sign in using your Amazon account.

You’ll also need to grant permission to share info between the two services, and now be able to do things like add items to your Amazon shopping list from within the Cortana UI, or in the reverse, query your Office 365 calendar from your Echo smart speaker.

YMMV at the moment, but it’ll surely get more integrated in time. Right now, you can’t stream music through Alexa to the PC (or, it seems, control smart home devices that work through Alexa, though that could be a regional thing for the moment) – and if you’ve a UK-based Amazon account, you can’t add the Cortana Skill to your Alexa account, so there’s no option of querying Cortana from the Echo, yet. US users can, though.

Still, Normal People don’t have electronics listening to everything they say… so what if a few nerds need to put up with some temporary friction from having two competing assistants try to work together? Click-Over-bzzzt.

Tip o’ the Week 443 – Starting modern apps

Posted on August 10, 2018 (Updated November 5, 2021) by ewand

Power Users often like to start applications quickly, without recourse to grubbing around with a mouse or a trackpad. Super Users might even want to write scripts that automate all sorts of things that mere mortals with less time on their hands are happy to do manually. Regardless of your penchant for automation, here are a few short cuts you can take to quickly start apps that you use often.

Apps pinned to taskbar

The taskbar in Windows obviously shows you what’s currently running, but can also be used to pin frequently accessed apps or – by default at least – those that Windows thinks should be frequent (Edge, Store, etc – right-click on them to unpin if you disagree). You’ll see a highlight line under the apps that are running, so those without the line are simply pinned there.

If you start typing the name of a favourite app at the Start menu, then right-click on it in the list, you can choose to pin it. So far, so good.

If you drag the pinned apps around, they’ll stay in that position relative to each other, and new apps will always start to the right (or underneath, if you use a vertical taskbar, as you really should). Now, if you press WindowsKey+number, you’ll jump to the app that is n along the line, and if that app isn’t running, then Windows will start it. So in the picture above, pressing WindowsKey+2 would start Edge, or WindowsKey+3 would bring Outlook to the fore.

Shortcut to desktop

You could try an old-skool method, by creating a desktop shortcut to apps that are already on your Start menu – press WindowsKey+D to show the bare desktop itself, then press Start to show the actual Start menu.

Assuming your Start menu isn’t full screen then you’ll be able to drag icons or tiles from the menu to the Desktop, and if you right-click the shortcut and look at Properties, you’ll see a Shortcut key: option… just press some key sequence that makes sense to you and press OK to save.

This method differs from the taskbar one above, because each press of the shortcut you set might start a new instance of the app (if it supports that) – which may or may not be desirable. If you end up with several windows of OneNote, for example, you could cycle through them by repeatedly pressing the appropriate WindowsKey+n as above.

Keep on Running

There’s no better mark of being a real PC deity than by launching your apps through running the executable name… you know the drill? WindowsKey+R to get the Run dialog (it’s so much faster than pressing Start), then enter the app’s real name and you’re off to the races. winword, excel, calc, notepad… they’re for novices. The genuine hardcases might even dive into the (old fashioned, obvs) Control Panel applets like ncpa.cpl rather than navigating umpteen clicks.

Looking at the shortcut to OneNote’s modern app above, though, it’s clear there isn’t a simple executable to run – onenote will launch the on-life-support OneNote 2016 version.

Many modern apps do, however, let you launch them from the Run dialog by entering a name with “:” at the end…

Examples include:

onenote:	Modern OneNote (annoyingly, you may get prompted to open in OneNote 2016 – just hit cancel and it goes away)
ms-settings:	The new-fangled control panel. You can tag on other commands like ms-settings:display or ms-settings:windowsupdate but you might be quicker clicking the icon than typing all of that.
bingmaps:	A good bit quicker than launching the browser and navigating to the maps URL, even if you do press ALT-D to set focus to the address bar, and type bingmaps <CTRL-ENTER> to auto-fill the www. and the .com
outlookmail:	Even though it’s not real Outlook, this launches the Mail part of the Mail & Calendar store app. outlookcal: does the other bit.
ms-windows-store:	For when you can’t wait to check out all the great new apps in the Microsoft Store.
fb:	If you feel the need to do a personality test or look at other people’s holiday photos.

Tip o’ the Week 442 – Whose phone? Your phone…

Posted on August 10, 2018 by ewand

Back at the May 2018 Build conference, an app for Windows was previewed, which would allow you to manage content from your phone, on your PC – “Your Phone”.

If you’re an Android user, and a Windows Insider, then you can get a preview version of the Your Phone app for the PC; after starting the app on the PC, it will ask for your mobile number and text you a link to download an updated version of the Microsoft Apps app (ya falla?). Download the update, sign in as appropriate, and suddenly your photos on the phone will start appearing in near real-time on your PC.

The Your Phone app actually uses a Wi-Fi connection on the phone to sync content with the PC – they don’t need to be on the same network but they do need to be able to talk to the back end service that coordinates things. For now, it just does photos (and only on Android), but in time, more services will be added. See more details here. And here.

The photo sharing capability is pretty cool – if you ever find yourself taking a photo on your phone and then immediately wanting to use it on your PC, then your alternatives are either to wait for OneDrive to sync your new pic from phone to cloud (and then back down to your PC)… or plug the phone in on a USB cable and root about in its file system to find the photo. Or the worst, but probably most used: you email the photo from your phone, to yourself…

Some features of Your Phone will be tied to particular preview versions of Windows 10 – such as the recent latest build, 17228.